Terms and conditions
Date of Last Revision: 12-8-2021
The Site belongs to Craft Standard Enterprises, Inc., an Arkansas corporation (“Craft Standard”, “we”, “our” or “us”). We reserve the right to withdraw or amend the Site, and any service or Content (defined below) provided or displayed on the Site. We will not be liable if, for any reason, all or any part of the Site is unavailable at any time for any reason. We may terminate, suspend or discontinue any aspect of the Site at any time, without notice or liability.
Certain areas of the Site may require you to register, setup an account or may otherwise ask you to provide information, including personal information, to participate in certain features or to access certain content. User accounts are strictly limited to those retailers that have purchased Craft Standard products (whether directly from Craft Standard or through an authorized distributor). The decision to provide any of your information is purely voluntary and optional; however, if you elect not to provide us with certain information, you may not be able to access certain content or participate in certain features of the Site. You represent and warrant to us that all of the information and data provided by you is accurate and complete in all respects.
If you create an account on the Site, you agree to be responsible for (i) maintaining the confidentiality of passwords or other account credentials you choose, and (ii) all activities that occur under such password or account credentials. You also agree to notify us immediately of (a) any loss of your password or account credentials, or (b) any unauthorized use of your password or account credentials. We will not be responsible or liable, directly or indirectly, in any way for any loss or damage of any kind incurred as a result of, or in connection with, your failure to comply with this section of these Terms and Conditions, or for any unauthorized use of or access to your account, password or account identifiers. If you provide us with your email address during account setup, registration or otherwise, you consent to receive communications from us electronically. We may communicate with you by email or by posting notices on the Site. All notices from Craft Standard intended for receipt by you shall be deemed delivered and effective when sent to the email address provided by you during your completion of the registration process or when posted to and made available to you on the Site. If you change your email address, you must update the email address in your account profile.
INTELLECTUAL PROPERTY RIGHTS
As between you and Craft Standard, (a) the Site, including, but not limited to, all trademarks, trade names, brand names, logos and images, service marks, trade dress and other intellectual property rights thereto, and (b) all information, materials, software or HTML code, scripts, text, artwork, photography, images, video and audio, and the design, selection and arrangement thereof and all intellectual property associated therewith, that are displayed or contained on the Site (the “Content”), are the sole property of Craft Standard and are protected by United States and international copyright, trademark, patent and other intellectual property or proprietary rights laws and unfair competition laws. All Content is provided as a service to users of the Site. Subject to the limited license set forth below, nothing contained in the Terms and Conditions shall be construed as conferring any right, title or interest in the Site or the Content.
Upon your acceptance of the Terms and Conditions, Craft Standard grants you a limited, non-transferable, non-sublicensable, non-exclusive, revocable right to access and use the Site and Content for your personal and professional, but non-commercial use only (except for the Content specifically accessible in the User Account section of the Site that may be used commercially solely for information purposes, without any right to reproduce the Content in any form). This right is subject to the following restrictions: (i) you may not copy, publish, distribute, perform, display, post, modify, create derivative works from, sell, license, reverse engineer or otherwise exploit the Site or any Content without the prior written permission of Craft Standard; (ii) you may not permit any copying of the Content; (iii) you may not remove or alter any copyright, trademark or other proprietary rights notices from copies of the Content from the Site; and (iv) you will not use the Site for any purpose that is unlawful or prohibited by the Terms and Conditions or any applicable laws or regulations. Craft Standard may revoke this limited right at any time for any or no reason. All rights not expressly granted are reserved by Craft Standard.
While using the Site, you agree not to: (a) defame, abuse, harass, stalk, threaten or otherwise violate the rights of others, including without limitation others’ privacy rights or rights of publicity; (b) impersonate any person or entity, falsely state or otherwise misrepresent your affiliation with any person or entity, or use any fraudulent, misleading or inaccurate email address or other contact information; (c) restrict or inhibit any other user from using the Site, including, without limitation, by means of “hacking” or defacing any portion of the Site; (d) express or imply that any statements you make are endorsed by us; (e) upload to, transmit through, or display on the Site any advertisements, solicitations, chain letters, pyramid schemes, investment opportunities or other unsolicited commercial communication (except as otherwise expressly permitted by us); (f) engage in spamming or flooding; (g) transmit any software or other materials that contain any viruses, worms, trojan horses, defects, date bombs, time bombs or other items of a destructive nature; (h) modify, adapt, sublicense, translate, sell, reverse engineer, decompile or disassemble any portion of the Site; (i) remove any copyright, trademark or other proprietary rights notices contained in or displayed on any portion of the Site; (j) “frame” or “mirror” any portion of the Site, or link to any page of or material on the Site; (k) use any robot, spider, site search/retrieval application or other manual or automatic device or process to retrieve, index, “data mine” or in any way reproduce or circumvent the navigational structure or presentation of the Site; or (l) harvest or collect information about users of the Site.
You may be able to link to third party websites or resources from the Site (“Linked Sites”). Linked Sites are provided solely as a convenience to users of the Site and are not an endorsement of any information, product or service reached through such Linked Sites. The Linked Sites are not under our control and we are not responsible for examining or evaluating the content or accuracy of, and we do not warrant and will not have any liability or responsibility for, any Linked Sites, or for any other materials, products, or services offered on the Linked Sites. You should carefully review the privacy notices and other conditions of use at the Linked Sites.
DISCLAIMERS AND LIMITATION OF LIABILITY
THE SITE AND ALL CONTENT AND FUNCTIONALITY INCLUDED ON OR OTHERWISE MADE AVAILABLE TO YOU THROUGH THE SITE, ARE PROVIDED TO YOU ON AN “AS IS” AND “AS AVAILABLE” BASIS. CRAFT STANDARD DOES NOT WARRANT THAT THE CONTENT OF THE SITE IS ACCURATE, COMPLETE, RELIABLE, CURRENT, OR ERROR-FREE. NEITHER CRAFT STANDARD NOR ITS THIRD PARTY PROVIDERS MAKE ANY REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE OPERATION OR AVAILABILITY OF THE SITE OR CONTENT, OR FUNCTIONALITY INCLUDED ON OR OTHERWISE MADE AVAILABLE TO YOU THROUGH THE SITE. the CONTENT on the site is provided for general information only and should not be relied upon or used as the sole basis for making decisions without consulting primary, more accurate, more complete or more timely sources of information.
YOU EXPRESSLY AGREE THAT YOUR USE OF (OR INABILITY TO USE) THE SITE OR SUBMISSION OF INFORMATION, IS AT YOUR SOLE RISK.
TO THE FULL EXTENT PERMISSIBLE BY APPLICABLE LAW, CRAFT STANDARD (ON BEHALF OF ITSELF AND ITS THIRD PARTY PROVIDERS) DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. CRAFT STANDARD DOES NOT REPRESENT OR GUARANTEE THAT THE SITE WILL BE FREE FROM LOSS, CORRUPTION, ATTACK, VIRUSES, INTERFERENCE, HACKING, OR OTHER SECURITY INTRUSION, OR WILL BE UNINTERRUPTED, AND CRAFT STANDARD (ON BEHALF OF ITSELF AND ITS THIRD PARTY PROVIDERS) DISCLAIMS ANY LIABILITY RELATING THERETO.
IN NO EVENT WILL THE CRAFT STANDARD INDEMNITEES (AS DEFINED BELOW) BE LIABLE, AND YOU HEREBY WAIVE ANY CLAIM AGAINST THE CRAFT STANDARD INDEMNITEES AND RELEASE THE CRAFT STANDARD INDEMNITEES FROM ANY LIABILITY FOR ANY LOSS OR DAMAGES OF ANY KIND ARISING FROM (A) THE USE OF THE SITE, (B) ANY CONTENT OR FUNCTIONALITY INCLUDED ON OR OTHERWISE MADE AVAILABLE TO YOU THROUGH THE SITE, (C) ANY ACTIONS CRAFT STANDARD TAKES OR FAILS TO TAKE AS A RESULT OF COMMUNICATIONS YOU SEND TO CRAFT STANDARD, OR (D) THE DELAY OR INABILITY TO USE THE SITE; INCLUDING ALL DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY AND CONSEQUENTIAL DAMAGES, WHETHER UNDER CONTRACT, LAW, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), OR OTHERWISE, EVEN IF CRAFT STANDARD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. At CRAFT STANDARD’S option, CRAFT STANDARD may seek all remedies available to IT under law and in equity, including injunctive relief in the form of specific performance to enforce the Terms and Conditions or actions for damages.
YOUR SOLE AND EXCLUSIVE REMEDY (INCLUDING FOR DAMAGES AND OTHER LOSSES) FOR ANY OF THE ABOVE CLAIMS OR ANY DISPUTE WITH CRAFT STANDARD RELATED IN ANY WAY TO THE USE OF THE SITE IS TO DISCONTINUE YOUR USE OF THE SITE. YOU AND CRAFT STANDARD AGREE THAT ANY CAUSE OF ACTION ARISING OUT OF OR RELATED TO THE SITE MUST COMMENCE WITHIN ONE (1) YEAR AFTER THE CAUSE OF ACTION ACCRUES OR THE CAUSE OF ACTION IS PERMANENTLY BARRED.
CERTAIN STATE LAWS DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR THE EXCLUSION OR LIMITATION OF CERTAIN DAMAGES. IF THESE LAWS APPLY TO YOU, SOME OR ALL OF THE ABOVE DISCLAIMERS, EXCLUSIONS, OR LIMITATIONS MAY NOT APPLY TO YOU, AND YOU MIGHT HAVE ADDITIONAL RIGHTS.
You will indemnify and hold harmless Craft Standard and its affiliates, and its and their respective directors, officers, employees, agents, representatives, licensors, and third party providers (collectively, the “Craft Standard Indemnitees”), on demand, from and against any and all fines, penalties, liabilities, losses, damages and other amounts of any kind whatsoever (including attorneys’ and experts’ fees), incurred by any of the Craft Standard Indemnitees, and shall defend the Craft Standard Indemnitees against (1) all claims arising out of or relating to your use of the Site, including any information, data or materials (whether tangible or intangible) provided by you in connection with your use of the Site or the Terms and Conditions, or use thereof by any Craft Standard Indemnitee, infringes, misappropriates or otherwise violates any trademark, trade secret, patent, copyright or other intellectual property right, proprietary right or privacy right of a third party; (2) all claims arising out of or relating to fraud committed by, or the intentional misconduct or gross negligence of, you; and (3) all claims arising out of or relating to your failure to comply with, or breach by you of, any provision of the Terms and Conditions.
We reserve the right to assume the exclusive defense and control of any matter otherwise subject to this section and, in such case, you agree pay for all costs and expenses arising out of or relating to such defense and to cooperate with us in the defense of such matter, at your sole cost and expense.
JURISDICTION AND GOVERNING LAW
The Terms and Conditions shall be governed by and construed in accordance with the laws, rules and regulations of the State of Arkansas without giving effect to any choice-of-law provision or rule (whether of Arkansas or any other jurisdiction) that would cause the application of the laws of any other jurisdiction. You hereby irrevocably consent and submit to the jurisdiction and venue of the courts located in the State of Arkansas for the adjudication of any matter arising out of or relating to the Terms and Conditions and waive any objection based on improper venue or inconvenient forum. No course of dealing or usage of trade will apply to the Terms and Conditions. We recognize that it is possible for you to obtain access to the Site from any jurisdiction in the world, but we have no practical ability to prevent such access. The Site has been designed to comply with the laws of the State of Arkansas and of the United States. If any Content, or your use of the Site, is contrary to the laws of the place where you are when you access it, the Site is not intended for you, and we ask you not to use the Site. You are responsible for informing yourself of the laws of your jurisdiction and complying with them.
The Terms and Conditions govern your use of the Site, including the submission of all data, information and other materials (whether tangible or intangible) through the Site. The Terms and Conditions constitute the entire agreement between you and Craft Standard with regard to your use of the Site and all matters addressed herein and supersedes all prior written or oral agreements or understandings previously existing between you and Craft Standard. No terms or conditions endorsed upon, delivered with or contained in or communicated by any of the foregoing will form part of the Terms and Conditions.
Failure by Craft Standard to enforce any provision in the Terms and Conditions will not be construed as a waiver of such or any other provision. No waiver will be binding upon Craft Standard unless in writing and signed by an authorized representative of Craft Standard, and any such waiver will be limited to the particular instance referred to. If any provision of the Terms and Conditions is held to be invalid, illegal or unenforceable for any reason, the remainder of the Terms and Conditions will continue in full force and effect and such invalid provision, to the maximum extent permitted by law and to the extent possible, will be construed in accordance with the original intent of the parties, and to the extent not possible, will be deemed severable from the Terms and Conditions. Headings used in the Terms and Conditions are for reference purposes only and in no way define or limit the scope of the section. As used in the Terms and Conditions, the word “including” and words of similar import means “including, without limitation.” You may not assign these Terms and Conditions (or any rights, benefits or obligations hereunder) by operation of law or otherwise without the prior written consent of Craft Standard, which may be withheld in Craft Standard’s sole discretion. Any purported assignment by you that does not comply with the terms of this Section 12 shall be null and void. Craft Standard may assign these Terms and Conditions, in whole or in part, in its sole discretion. In the event these Terms and Conditions are terminated as between you and Craft Standard, all provisions which, expressly or by their nature, survive termination of these Terms and Conditions, including, but not limited to, Sections 3, 7, 8, 9 and 11, will survive termination.
We welcome your feedback about the Site. However, any comments, ideas, notes, messages, suggestions or other communications sent to us shall be and remain the exclusive property of Craft Standard, and we may use all such communications in any manner without compensation to you.
Should you have any questions or complaints regarding the Terms and Conditions, please contact us by email at firstname.lastname@example.org.